| |

Make This: Altoid Tin Mouse House Tutorial

This little mouse + bed in an Altoid tin has been quite the popular critter, especially on Pinterest.altoid tin mouse 2We’ve had several people ask us how to make this, so we came up with some directions.  You can use anything for the mouse body, but we used an old felted wool sweater for the body, wool felt for the tail, arms, legs, nose and ears.  The pattern pieces shown on the cutting mat will give you a rough idea of the dimensions.

mouse pattern piecesCut out the mouse body and all the rest.  Put a little pleat in the ears, and sew everything to the body pieces.  Embroider the eyes and mouth (we used the machine– too easy).  altoid tin mousePlace right sides together, tuck in the limbs, ears and tail and sew around the mouse body, leaving a small opening of 1 to 1 1/2″.  Turn right side out, stuff lightly and whip opening closed.  The mouse and pillow need to be lightly stuffed or they will be too fat and the tin won’t stay closed.  At least we think that’s what would happen to someone who stuffed things too full and then found out it wouldn’t all fit at the very end of the project . . .     trace around tinTrace around the bottom of the tin to make a pattern for the bed liner.  Use this pattern to cut a piece of wool felt to cover the bottom of the tin.  Pinking shears give it that extra bit of pizzazz.bed liner
glue bed linerGlue the top half of the felt to the tin, but leave the bottom part loose so you can glue the blanket bottom in later.mouse pillow dimensionsNow, make the little pillow.  Cut it out according to pattern size, fold in half with right sides together, and sew around, leaving a 1 to 1 1/2″ opening.  Turn right side out and stuff (lightly, remember).  Whip the opening closed and place it in the glued end of the tin.mouse pillowThis may seem backwards to do everything this way, but with the mouse, pillow and bottom part done, it is easier to position the blanket in the right spot.blanket dimensionsMake the blanket by cutting 2 pieces of fabric according to pattern.  Sew with right sides together on only three sides.
blanketTurn, press, and top stitch across the top.  Fold the top down about 3/4″ and press so it looks like a sheet.  The fourth edge is left raw so it can be glued into the other end of the tin, under the felt liner.  glue blanketAdjust the blanket and glue the raw edge in place and glue the felt liner over the top of the blanket.
blanket and pillowOnce the glue is dry, tuck in your little mouse and snap it closed.  altoid tin mouse house 2Using the top as a pattern, cut another piece of wool felt to cover the top (unless you want it to remain pop art and say “Altoids”– that’s cool too).  Decorate the top with little felt cutouts, buttons, crystals or whatever your heart desires.
altoid tin mouse 3Now, surprise one of the little people in your life with your creation.  If you give a child a mouse . . . all the other children will want one, too!

Diane & Audrey

Similar Posts

4 Comments

  1. Did you just use one layer for the arms and legs and stitch around them? Or did you use two layers? Thanks for sharing this pattern..I am making several of these for grandkids for their stockings..
    Alice

    1. Hi Alice! We used two layers for the arms and legs, and stitched them together. What a fun idea for Christmas stockings! We’d love for you to share a quick picture with us once they’re all done.

    2. Thanks for your reply. Will be sure a picture of finished project.
      With kind regards
      Alice Petty

Leave a Reply

Your email address will not be published. Required fields are marked *